prepare existing tools in the car there because there are tools in your car is the key that it is definitely suitable size.
step 1
open air hose located on the machine precisely on the cylinder head, you need to open some of the bolts are size 10.
step 2
loose connectors on each head coil, 4 connectors that are connected
step 3
loose bolts in each coil size 10.
step 4
loose coil on each spark plug hole and store it in a safe place, do not let your attention drop.
step 5
loose spark plug with a tool that you've prepared earlier. was off one by one every spark plugs, spark plug turn attention to open the tool counter-clockwise.
step 6
note that you loose spark plug before, is it still good condition, how do you know if the plugs were still good, you just look at the spark plug gap found, note the condition of positiv charcoal when it is seen sideways then replace spark plugs with new ones.
step 7
before you install new spark plugs, check the new spark plug gap should not concern anyone meeting the conditions, if there is the problem then do the adjustment with the adjustment tool.
step 8
installation of new spark plugs do to be careful when installing the spark plugs while lowering the tool into the spark plug hole, attention should not be too hard when put it feared would hit and damage the spark plug gap.
step 9
to do the next step to do in order to belangkang step - step before until you replace the air hose on the cylinder head
step 1
open air hose located on the machine precisely on the cylinder head, you need to open some of the bolts are size 10.
step 2
loose connectors on each head coil, 4 connectors that are connected
step 3
loose bolts in each coil size 10.
step 4
loose coil on each spark plug hole and store it in a safe place, do not let your attention drop.
step 5
loose spark plug with a tool that you've prepared earlier. was off one by one every spark plugs, spark plug turn attention to open the tool counter-clockwise.
step 6
note that you loose spark plug before, is it still good condition, how do you know if the plugs were still good, you just look at the spark plug gap found, note the condition of positiv charcoal when it is seen sideways then replace spark plugs with new ones.
step 7
before you install new spark plugs, check the new spark plug gap should not concern anyone meeting the conditions, if there is the problem then do the adjustment with the adjustment tool.
step 8
installation of new spark plugs do to be careful when installing the spark plugs while lowering the tool into the spark plug hole, attention should not be too hard when put it feared would hit and damage the spark plug gap.
step 9
to do the next step to do in order to belangkang step - step before until you replace the air hose on the cylinder head
